Delta-electronics RTU-DNET Manuale Utente Scaricare il pdf (Pagina 25)

DeviceNet Remote I/O Communication Module RTU-DNET

DVP-PLC Application Manual

(2) Select “Setup” => “Communication Setting” => “System Channel”, and the “Serial Port Setting” dialog box

will appear.

(3) Set up the communication parameters in the PC and DVP-SV, e.g. the communication port, address, baud

rate and communication format.

Item Function Default

COM Port

COM port on the PC to be used to communicate with

DVP-SV

COM1

Address Communication address of DVP-SV 01

Baud rate Communication speed between the PC and DVP-SV 9,600 (bps)

Data Bits 7

Parity Even Parity

Stop Bit

Communication protocol between the PC and DVP-SV

Mode Communication mode between the PC and DVP-SV ASCII

(4) Click on “OK” and return to the main page.

(5) Select “Network” => “Online”, and the “Select Communication Channel” dialog box will appear.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 40 41

Nessun commento

Delta-electronics RTU-DNET Manuale Utente Pagina 25